Work Procedure

ADDITIONAL SERVICE WHEN REPLACING ECM

Work Procedure


1. PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS

Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement" Special Repair Requirement.
- GO TO 2.

2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

Refer to "Work Procedure" Work Procedure.
- GO TO 3.

3. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING

Refer to "Work Procedure" Work Procedure.
- GO TO 4.

4. PERFORM IDLE AIR VOLUME LEARNING

Refer to "Work Procedure" Work Procedure.
- END