Removal And Installation

EVAP CANISTER

Removal and Installation

NOTE:
The EVAP canister vent control valve and EVAP canister system pressure sensor can be removed without removing the EVAP canister.

REMOVAL

1.Remove the EVAP canister protector cover.
2.Disconnect the harness connectors from the EVAP control system pressure sensor and the EVAP canister vent control valve.
3.Disconnect the EVAP canister purge hose, the EVAP vent line, and the EVAP canister vent control valve hose.
4.Remove the EVAP canister bolt.
5.Remove the EVAP canister from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Do not reuse O-rings.