With Intelligent Key System

BCM (BODY CONTROL MODULE)

Removal and Installation


CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description" With Intelligent Key System.

REMOVAL

1.Disconnect the negative battery terminal. Refer to "Removal and Installation" Removal and Replacement.
2.Remove instrument lower panel LH. Refer to "Removal and Installation" Instrument Lower Panel LH.





3.Remove BCM screws (A) and pull out the BCM (B).
4.Disconnect the harness connectors from the BCM (B) and remove.
White arrow indicates: Front

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Be sure to perform "WRITE CONFIGURATION" when replacing BCM. Refer to "CONFIGURATION (BCM) : Work Procedure" With Intelligent Key System.
- For Canada, be sure to perform the system initialization (NATS) when replacing BCM. Refer to BCS57, "CONFIGURATION (BCM) : Work Procedure".
- When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be re-registered.