Special Repair Requirement

INSPECTION AND ADJUSTMENT

ZERO POINT RESET : Special Repair Requirement


1. PERFORM ZERO POINT RESET

1.Perform preliminary checks:
NOTE:
- Level the vehicle
- Minimize vibrations near the vehicle
- Remove any objects on passenger seat
- Do not touch the vehicle during zero point reset
2.Select START on ZERO POINT RESET from, WORK SUPPORT of "OCCUPANT DETECTION".
3."Zero point reset" starts.
- GO TO 2.

2. CONFIRM RESET

1.Check that "Complete" is displayed on "Zero point reset status".

CAUTION:
- "Complete" may be displayed if the seat has been reinstalled, or "zero point reset" has already been performed.
- "Incomplete" may be displayed if a new seat is installed.
- Air bag warning lamp blinks in user mode if zero point reset is "incomplete".
Is zero point reset status "complete"?
YES- Print out "ZERO POINT RESET CURRENT STATUS" screen. Inspection end.
NO- Recheck the preliminary check items and perform zero point reset again.