Manual Air Conditioning

REFRIGERANT PRESSURE SENSOR

Removal and Installation for Refrigerant Pressure Sensor


REMOVAL


CAUTION:
- Do not damage the condenser fins.





- Perform lubricant return operation before each refrigeration system disassembly. However, if a large amount of refrigerant or lubricant is detected, do not perform lubricant return operation. Refer to "Perform Oil Return Operation" Perform Oil Return Operation.
1.Move air guide aside.
2.Disconnect the harness connector from the refrigerant pressure sensor.
3.Remove the refrigerant pressure sensor (1) from the liquid tank on the condenser.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Replace O-ring with new one. Then apply compressor oil to them when installing.
- Check for leakages when recharging refrigerant. Refer to "Leak Test" Leak Test.