Front Power Window Switch (Passenger Side)

POWER SUPPLY AND GROUND CIRCUIT

FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK FRONT POWER WINDOW SWITCH RH POWER SUPPLY

1.Turn ignition switch OFF.
2.Disconnect front power window switch RH connector.
3.Turn ignition switch ON.
4.Check voltage between front power window switch RH harness connector and ground.





Is the inspection result normal?
YES- Inspection End.
NO- GO TO 2.

2. CHECK FRONT POWER WINDOW SWITCH RH POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect BCM connector.
3.Check continuity between BCM harness connector and front power window switch RH harness connector.





4.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace BCM. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace harness.