Line Pressure Test

LINE PRESSURE TEST

Work Procedure


INSPECTION

1.Check the engine oil level. Replenish if necessary. Refer to "Inspection" Inspection.
2.Check for CVT fluid leaks. Refer to "Inspection" Inspection.
3.Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temperature is 50 to 80�C (122 to
176�F).
4.Stop the vehicle, apply the parking brake and block the tires.
5.Start the engine.
6.Select "Data Monitor" in "TRANSMISSION".
7.Select "LINE PRESSURE".
8.Measure the line pressure at both idle and the stall speed.

CAUTION:
Keep brake pedal pressed all the way down during measurement.

Line pressure: "Line Pressure" Pressure, Vacuum and Temperature Specifications

NARROWING-DOWN MALFUNCTIONING PARTS