Procedure

CALIBRATION OF G SENSOR

Procedure


1. PREPARATION BEFORE CALIBRATION PROCEDURE

1.Park the vehicle on a level surface.
2.Adjust air pressure of all tires to the specified pressure. "Tire Air Pressure" [1][2]Specifications.
- GO TO 2.

2. PERFORM CALIBRATION

With CONSULT
1.Turn ignition switch ON.

CAUTION:
Never start engine.
2.Select "Work Support" in "TRANSMISSION".
3.Select "G SENSOR CALIBRATION".
4.Touch "Start".

CAUTION:
Never swing the vehicle during "G sensor calibration".
Is "COMPLETED" displayed?
YES- GO TO 3.
NO- Perform steps 1 and 2 again.

3. PERFORM THE SELF-DIAGNOSIS

With CONSULT
1.Turn ignition switch OFF and wait for 10 seconds.
2.Turn ignition switch ON.
3.Select "Self Diagnostic Results" in "TRANSMISSION".
Is "P1586" or "P1588" detected?
YES- Go to "DTC Index" Testing and Inspection.
NO- Calibration end