Removal And Installation

SIDE OIL SEAL

Removal and Installation


REMOVAL

1.Remove front drive shaft from transaxle assembly. Refer to "Removal and Installation" Removal And Installation.





2.Remove differential side oil seal (1) using suitable tool.

CAUTION:
Do not damage transaxle case and clutch housing.

INSTALLATION






1.Install differential side oil seal (1) to transaxle case side (B) and clutch housing side (C) using Tool.
Dimension (L1): 5.7 - 6.3 mm (0.224 - 0.248 in)

Dimension (L2): 2.4 - 3.0 mm (0.094 - 0.118 in)
Tool number: KV32500QAA (-)

CAUTION:
- Do not reuse differential side oil seal.
- Do not tilt differential side oil seal.
- Do not damage clutch housing and transaxle case.
2.Install the front drive shaft. Refer to "Removal and Installation" Removal And Installation.