Inspection

MAINSHAFT AND GEAR

Inspection


INSPECTION AFTER DISASSEMBLY

Mainshaft and Gear
Check the following items and replace if necessary.





- Damage, peeling, uneven wear, and distortion of shaft.
- Excessive wear, damage, and peeling of gear.
Synchronizer
Check the following items and replace if necessary.





- Contact surface breakage, damage, and unusual wear of coupling sleeve, synchronizer hub, insert key, and spring.
- Coupling sleeve and synchronizer hub move smoothly.





- Breakage, damage, and excessive wear of baulk ring cam surface and insert contact surface.
Bearing





Check bearing for damage and rough rotation. Replace if necessary.