Front Power Window Switch

FRONT POWER WINDOW SWITCH

Removal and Installation


REMOVAL






1.Remove front power window and door lock/unlock switch (RH)
finisher assembly using a suitable tool (A).
Broken triangle indicates: Pawl
2.Disconnect the harness connector from the front power window and door lock/unlock switch (RH).





3.Separate front power window and door lock/unlock switch (1)
from front power window and door lock/unlock switch (RH) finisher using a suitable tool.

CAUTION:
Do not bend back the pawls on the switch finisher too far or breakage may occur.

INSTALLATION

Installation is in the reverse order of removal.