With Intelligent Key System

POWER SUPPLY AND GROUND CIRCUIT

BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" With Intelligent Key System.

1. CHECK FUSES AND FUSIBLE LINK

Check that the following fuses and fusible link are not blown.





Is the fuse blown?
YES- Replace the blown fuse or fusible link after repairing the affected circuit.
NO- GO TO 2.

2. CHECK POWER SUPPLY CIRCUIT

1.Disconnect BCM connector M99.
2.Check voltage between BCM connector M99 and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair harness or connector.

3. CHECK GROUND CIRCUIT

Check continuity between BCM connector M99 and ground.





Is the inspection result normal?
YES- Inspection End.
NO- Repair harness or connector.