A/T - No Reverse/Delayed Reverse Cold

9232oldsmobile04

NUMBER: 91-T-238A

CORP.REF.NO: 277111

DATE: June 1992

SECTION: 7A, 4L60


SUBJECT:
NO REVERSE/DELAYED REVERSE COLD
- INSTALL LONG LIPPED REVERSE INPUT CLUTCH PISTON OUTER SEAL

MODELS/YEARS:
1991 CUSTOM CRUISER AND BRAVADA





This bulletin cancels and supersedes Dealer Technical Bulletin 91-T-238 which should be discarded.

Some 1991 HYDRA-MATIC 4L60 transmissions may exhibit a "no reverse" or "delayed reverse" condition when outside temperatures are below zero degrees Fahrenheit.

A transmission is considered to have a delayed reverse condition if it takes longer than three seconds for the transmission to engage when shifted into the reverse range.

If a transmission has a "no reverse" or "delayed reverse" condition, inspect the reverse input clutch piston outer seal. Determine if the seal is a "short lip" or "long lip" design by comparing it to the illustration below. If it is a short lip design, replace it with a long lip seal contained in the service packages listed under Service Parts Information.

If the reverse input clutch piston outer seal is a long lip design, or the newly installed long lip seal doesn't correct the delayed reverse condition, the reverse input clutch housing may be out of round. Inspect the housing and replace if necessary.

The long lipped seals are currently available in several service packages from GMSPO.

Description Part Number
Package - Overhaul Seals and Gaskets 8683958
Package - Overhaul Repair Complete 8683959