Differential - Governor Removing Tool Revision

9232oldsmobile02

NUMBER: 92-U-42

CORP.REF.NO: 264201

DATE: May 1992

SECTION: 4B


SUBJECT:
GOVERNOR REMOVING TOOL REVISION


MODEL/YEARS:
1991-92 BRAVADA W/LOCKING
DIFFERENTIAL (RPO G80)





Some technicians may comment that they encounter difficulty when using the locking differential governor removal tool, J 26252. The spacer may interfere with a shoulder on the machined surface of the differential case causing the tool to pull at an angle to the bushing. See the illustrations.

To correct this condition, the tool has been redesigned with a 45 degree flat added to the spacer. If your spacer does not have this 45 degree flat, it may be modified by adding a flat as shown in the illustrations. This flat will allow the spacer to center over the governor bushing and pull it straight out. If it is desired, a new spacer with the 45 degree flat may be purchased by contacting Kent-Moore Tools at 1- 800-345-2233 and requesting Spacer, J 26252-4.