Installation Procedure

1. Install the SDM (2) to the vehicle. Refer to Fastener Notice in Cautions and Notices.
2. Install the SDM mounting fasteners (1).

Tighten
Tighten fasteners to 10 N.m (89 lb in).

3. Install the SDM wiring harness connector (3) to the SDM (1).
4. Install the Connector Position Assurance (CPA) to the SDM wiring harness connector.
5. Position the carpet to cover the SDM then install the carpet retainer.
6. Install the passenger front seat.
7. Enable the SIR system.