Radio/Stereo: Service and Repair

RADIO REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the battery negative cable.
2. Remove the instrument panel accessory trim plate.
3. Remove the radio mounting screws.
4. Remove the radio.
5. Disconnect the electrical connector and the antenna lead.

INSTALLATION PROCEDURE




1. Connect the electrical connector and the antenna lead.
2. Install the radio.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the radio mounting screws.

Tighten
Tighten the screws to 1.9 N.m (17 lb in).

4. Install the instrument panel accessory trim plate.
5. Connect the battery negative cable.
6. Verify proper radio operation.