Radio, Stereo, and Compact Disc: Service and Repair
REAR SEAT AUDIO CONTROL REPLACEMENTREMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the negative battery cable.
2. Remove the rear console trim panel retaining screw.
3. Remove the rear console trim panel from the console by carefully prying outward with a flat-bladed tool.
4. Remove the console wiring harness connector from the rear seat audio control panel.
5. Remove the rear seat audio control panel from the rear console trim panel by compressing the retaining tabs and carefully pushing outward.
INSTALLATION PROCEDURE
1. Install the rear seat audio control panel to the rear console trim panel by pressing the unit into place, ensuring the retaining tabs lock into place.
2. Install the console wiring harness connector to the rear seat audio control panel.
3. Install the rear console trim panel to the console by pressing the unit into place, ensuring the retaining tabs lock into place.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear console trim panel retaining screw.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
5. Install the negative battery cable.