Front Seat Back Replacement (Bucket Seat)

Front Seat Back Replacement (Bucket Seat)

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the seat back cover and pad.
3. Remove the seat cushion trim cover and pad.




4. Disconnect the electrical connector for the seat back recliner motor, if equipped.
5. Remove the bolts securing the seat back to the seat adjuster assembly.
6. Remove the seat back.

Installation Procedure

1. Install the seat back to the seat adjuster assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts securing the seat back to the seat adjuster assembly.

Tighten the seat back bolts to 24 N.m (18 lb ft).




3. Connect the electrical connector for the seat back recliner motor, if equipped.
4. Install the seat cushion trim cover and pad.
5. Install the seat back cover and pad.
6. Install the seat in the vehicle.