Fog Lamp Replacement - Front

REMOVAL PROCEDURE




1. Ensure that the fog lamp switch is in the OFF position.
2. Disconnect the electrical connector.
3. Remove the screws that retain the fog lamp assembly to the bumper.
4. Remove the fog lamp assembly from the bumper.

INSTALLATION PROCEDURE




1. Install the fog lamp assembly to the bumper.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws that secure the fog lamp assembly to the bumper.

Tighten
Tighten the screws to 10 N.m (88 lb in).

3. Connect the electrical connector.
4. Re-aim the fog lights. Refer to Fog Lamp Aiming Procedure. Fog Lamp Aiming Procedure