NV 1500

Fluid Replacement

^ Tools Required
- J36511 Oil Fill/Drain Plug Hex Bit (17 mm)

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Thoroughly clean around the fill plug and the oil drain plug.
3. Use the J 36511 in order to remove the oil fill plug.
4. Catch the oil in a suitable container.





5. Use the J 36511 in order to remove the oil drain plug.

Installation Procedure





1. Apply sealant to the oil drain plug threads. Use Teflon 0D GM P/N 1052080, or the equivalent.

Notice: Refer to Fastener Notice in Service Precautions.





2. Use the J 36511 in order to install the oil drain plug.
Tighten the oil drain plug to 30 Nm (22 ft. lbs.).





3. Fill the transmission to the level of the fill plug hole.





4. Apply sealant to the oil fill plug threads. Use Teflon GM P/N 1052080 or the equivalent.





5. Use the J 36511 in order to install the oil fill plug.
Tighten the oil fill plug to 30 Nm (22 ft. lbs.).
6. Lower the vehicle.