Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile Truck >> 2001 >> Bravada V6-4.3L VIN W >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair

Ignition Control Module: Service and Repair

IGNITION CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the electrical connector (3).
2. Remove 2 screws (4) holding the ignition control module (2) and the heat sink (1) to the bracket.
3. Remove the ignition control module and heat sink.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the ignition control module (2) and the heat sink (1) on the bracket with the 2 screws (4).

Tighten
Tighten the screws to 3.5 N.m (30 lb in).

2. Reconnect the electrical connectors (3).
pro multis · About Operation CHARM