Tilt Spring - Assemble

Tilt Spring - Assemble - Off Vehicle (Floor Shift)





1. Use the tilt lever to tilt the column to the UP position.





2. Lubricate the tilt spring with synthetic grease.

Caution: Refer to Tilt Spring Caution in Service Precautions.

3. install the spring guide into the tilt spring.





4. Install the tilt spring (1) onto the steering column support assembly (2) and onto the steering column tilt head assembly by using the following procedure:
4.1. Install one end of the tilt spring (1) onto the steering column tilt head assembly.
4.2. Install the other end of the tilt spring (1) onto the post on the steering column support assembly (2).
5. Remove the tilt lever.
6. Install the upper and lower trim covers. Refer to Trim Covers, Shift Lever Seal - Assemble - Off Vehicle.