Clutch Fork Replacement

Clutch Fork Replacement- Front Drive Axle

^ Tools Required
- J 33799 Clutch Fork Housing Seal Installer

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the inner axle shaft and housing assembly.





3. Remove the clutch cable retainer spring (14) from the clutch fork (17).
4. Remove the clutch fork (17) and the clutch fork inner spring (16) from the inner axle shaft housing.
5. Remove the clutch fork housing seal (15) from the inner axle shaft housing (4). Use a punch to drive out the seal.

Installation Procedure





1. Install the new clutch fork housing seal using the J 33799.





2. Install the new clutch fork (17) and clutch fork inner spring (16) into the inner axle shaft housing.
3. Install the clutch cable retainer spring (14) onto the clutch fork (17).
4. Install the inner axle shaft and housing assembly.
5. Lower the vehicle.