Entering On-Board Diagnostics

The on-board diagnostic modes can only be entered in a sequential order from modes 1-3.
^ Enter the right power sliding door system on-board diagnostics using the right B-pillar open/close switch and the right on/off switch in the overhead console.
^ Enter the left power sliding door system on-board diagnostics using the left B-pillar open/close switch and the left on/off switch in the overhead console.

1. Both power sliding doors must be closed and in the latched position.
2. Place the on/off switch in the overhead console to the OFF position.
3. Press and hold the B-pillar power sliding door open/close switch.
4. While holding the open/close switch, operate the on/off switch through 10 ON and OFF cycles within 10 seconds stopping in the on position.
5. The sliding door alarm will sound 1 long tone indicating diagnostic mode 1 is active.