Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Liftgate

Removal Procedure

1. Open the liftgate.
2. Remove the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (Service and Repair) .




3. Remove the liftgate latch retaining bolts.
4. Disconnect the electrical connector from the liftgate latch.
5. Using a small flat-bladed tool remove the lock cylinder rod from the liftgate latch.
6. Release the latch cable retainer and remove latch cable from liftgate latch.
7. Remove the liftgate latch from the liftgate.



Installation Procedure





1. Install the liftgate latch to the liftgate
2. Press the lock cylinder rod into the liftgate latch.
3. Install the latch cable to the liftgate latch and engage latch cable retainer.
4. Connect the electrical connector to the liftgate latch.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the liftgate latch retainer bolts.

Tighten the bolts to 10 N.m (89 lb in).

6. Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (Service and Repair) .
7. Close the liftgate.