With U42

REMOVAL PROCEDURE




1. Remove the dome lamp lens cover.
2. Remove the screws from the dome lamp.
3. Disconnect the electrical connector from the dome lamp.
4. Remove the dome lamp.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the dome lamp.
2. Align the dome lamp to the headliner.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws to the dome lamp.

Tighten
Tighten the dome lamp screws to 2 N.m (18 lb in).

4. Install the dome lamp lens cover.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes