Body Control Module: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.
2. Remove the right side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
3. Push the release tab on the bottom of the bracket to release the body control module.
4. Slide the body control module from the bracket.




5. Disconnect the electrical connectors.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the body control module.




2. Align the tabs on the body control module with the slots in the mounting bracket. Push the body control module up until it clicks in place.
3. Install the right side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.
5. Setup the BCMs customized options. Programming and Relearning