Tie Rod End

Inner Tie Rod 74 ft. lbs.
Tie Rod Ball Stud Nut * 22 ft. lbs. + 120 degrees (2 flats)

* This is a prevailing torque type fastener. This fastener may be reused ONLY if:
- The fastener and its counterpart are clean and free from rust
- The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating. Refer to the appropriate service procedure for the prevailing torque value.

If the fastener does not meet these criteria, REPLACE the fastener.

Ensure that 2.5-4.5 tie rod end threads are visible beyond the tie rod ball stud nut nylon.