Strut

Front Strut Lower Nuts - at Knuckle * 90 ft. lbs.
Front Strut Shaft Nut * 63 ft. lbs.
Strut Upper Nut 30 ft. lbs.


* This is a prevailing torque type fastener. This fastener may be reused ONLY if:
^ The fastener and its counterpart are clean and free from rust.
^ The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating Refer to the appropriate service procedure for the prevailing torque value.
If the fastener does not meet these criteria. REPLACE the fastener.