SIR Steering Wheel Module Coil - Disassemble

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers-Disassemble-Off Vehicle.





2. Remove the wire harness assembly (4) from the wire harness strap (5).
3. Remove the wire harness straps (3) from the wire harness assembly (4).
4. Remove the wire harness strap (2) from the upper tilt head assembly (1).





5. Remove the retaining ring (1).
6. Remove the inflatable restraint steering wheel module coil (2).
7. Remove the wave washer (3).