Stabilizer Bushing: Service and Repair

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Move (turn) the tires in order to access the stabilizer shaft insulator brackets.
3. Remove the left and right side stabilizer shaft insulator bracket bolts.





4. Remove the left and right side stabilizer shaft insulator brackets.





5. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).

Installation Procedure





1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).





2. Install the left and right side stabilizer shaft insulator brackets.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the left and right side stabilizer shaft insulator bracket bolts.
- Tighten the stabilizer shaft insulator bracket bolts to 48 Nm (35 inch lbs.).
4. Lower the vehicle.