71. Camshaft Position Actuator Solenoid Valve Installation

Camshaft Position Actuator Valve Installation





1. Apply clean engine oil to the camshaft position actuator valve hole.
2. Install the camshaft position actuator valve.
3. Add sealant GM P/N United States 12346004, GM P/N Canada 10953480 to the camshaft position actuator valve bolt threads.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the camshaft position actuator valve bolt.
^ Tighten the camshaft position actuator valve bolt to 10 Nm (89 inch lbs.).