Auxiliary Heating and A/C Operation

There are two separate controls for the auxiliary HVAC system. There is the front auxiliary blower motor switch and the auxiliary HVAC control module. If the front auxiliary blower motor switch is in any other position than OFF or REAR, then the auxiliary air temperature actuator mimics the set passenger temperature. The auxiliary mode will mimic the primary mode. If the front auxiliary blower motor switch is in the REAR position, then the system will only function with inputs to the auxiliary HVAC control module. If the front auxiliary blower motor switch is in the OFF position, then the auxiliary HVAC control module does not respond to input. The auxiliary HVAC control module can not request A/C operation from the PCM.

The auxiliary air temperature switch is a rotary knob switch. Turning the air temperature switch to the warmest position diverts most of the airflow through the heater core, which increases the outlet air temperature. Turning the air temperature switch to the coolest position diverts most of the airflow around the heater core, which decreases the outlet air temperature.

The auxiliary air temperature actuator shares a control circuit with the auxiliary mode actuator. If change of position is required for both actuators, then the module positions the auxiliary air temperature actuator first. All control circuits for the auxiliary actuators are at a low voltage potential until a change of position is required. The module then applies a high voltage potential to the appropriate control circuit, which will rotate the actuator.

The coolant bypass valve controls coolant flow to the auxiliary heater core. If a cool air temperature is selected, the auxiliary HVAC control module sends a class 2 message to the HVAC control module to close the valve. When the HVAC control module applies 12 volts to the coolant bypass solenoid control circuit, the solenoid opens. When the solenoid is open, a diaphragm closes the water valve when vacuum is applied. This action restricts coolant flow to the auxiliary heater core. The coolant bypass valve is a normally open valve.