Underhood Lamp: Service and Repair

REMOVAL PROCEDURE




1. Open the hood.
2. Disconnect the underhood lamp electrical connector (1).
3. Release the lower retaining tab located near the electrical connector.
4. Move the lower retaining tab away from the hood and lower the underhood lamp to release the upper retaining tab.
5. Remove the underhood lamp from the hood.

INSTALLATION PROCEDURE




1. Position the underhood lamp to the hood.
2. Install the upper retaining tab into the hood.
3. Seat the lower retaining by pushing the underhood lamp towards the hood.
4. Connect the underhood lamp electrical connector (1).
5. Close the hood.