Electronic Park Lock Switch

Electronic Park Lock Switch Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the inflatable restraint steering wheel module.
2. Remove the upper and lower trim covers.





3. Remove the connector (2) from the electric park lock (1).





4. Pry the electric park lock (2) off of the ignition lock cylinder case assembly (1).

Installation Procedure





1. Snap the electric park lock (2) onto the ignition lock cylinder case assembly (1).

Caution: Refer to SIR Module Coil Caution in Service Precautions.





2. Reconnect the connector (2) to the electric park lock (1).
3. Install the upper and lower trim covers.
4. Enable the inflatable restraint steering wheel module.