Side Bearings Replacement

Differential Side Bearings Replacement

^ Tools Required
- J 22912-01 Split-Plate Bearing Puller
- J 21784 Side Bearing Installer
- J 29710 Differential Side Bearing Installer
- J 45231 Differential Side Bearing Installer
- J 8092 Universal Driver Handle- 3/4 in - 10
- J 8107-2 Side Bearing Puller Pilot

Removal Procedure
1. Remove the differential.
2. Remove the differential side bearings by doing the following:
2.1. Install the J22912-01 onto the differential case.
2.2. Install the J 8107-2 onto the differential case bearing.
2.3. Remove the differential side bearings using the J22912-01 and a hydraulic press.

Installation Procedure





1. Install the differential side bearings by doing the following:
1.1. In order to protect the differential case, install the J 8107-2 in the case on the side opposite the bearing installation.
1.2. Install the J 45231, 8.0 inch axle, or the J21784, 8.6 inch axle (2), and the J 8092 (1) onto the differential case bearing as shown.
1.3. Drive the bearing onto the case using the J45231, 8.0 inch axle, or the J21784, 8.6 inch axle (2) and the J 8092 (1).
2. Install the differential.