Seat Back Frame Replacement - Front

Seat Back Frame Replacement - Front

Removal Procedure
1. Remove the seat assembly from the vehicle.
2. Remove the seat trim panel.
3. Remove the front seat back.
4. Remove the seat back cover and pad.
5. Remove the front seat back panel.
6. Remove the lumbar assembly.
7. Remove the seat belt and retractor assembly.




8. Remove 2 screws (1) securing the inflatable side impact module to the seat back frame.




9. Remove the 2 push pins (1) securing the side impact module tub to the seat back frame.




10. Remove the SIR wiring harness (1) from the seat back frame.
11. Remove the lumbar wiring harness (3) from the seat back frame.
12. Remove the wiring harness clips (2) from the seat back frame.

Installation Procedure




1. Install the wiring harness clips (2) to the seat back frame.
2. Install the lumbar wiring harness (3) to the seat back frame.
3. Install the SIR wiring harness (1) to the seat back frame.




4. Install the side impact module tub to the seat back frame with 2 push pins (1).






Notice: Refer to Fastener Notice in Service Precautions.

5. Install the inflatable side impact module to the seat back frame with 2 screws (1).

Tighten the side impact module screws to 9 N.m (80 lb in).

6. Install the seat belt and retractor assembly.
7. Install the lumbar assembly.
8. Install the front seat back panel.
9. Install the seat back cover and pad.
10. Install the front seat back.
11. Install the seat trim panel.
12. Install the seat assembly to the vehicle.