Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile Truck >> 2003 >> Bravada 2WD L6-4.2L VIN S >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Camshaft >> Service and Repair >> Camshaft Position Actuator Solenoid Valve Replacement

Camshaft Position Actuator Solenoid Valve Replacement



Camshaft Position Actuator Solenoid Valve Replacement

Removal Procedure

1. Remove the drive belt.
2. Remove the 3 power steering pump bolts and move the pump out of the way.
3. Disconnect the camshaft position actuator solenoid electrical connector.






4. Remove the camshaft position actuator solenoid retaining bolt (3).
5. Remove the camshaft position actuator solenoid (2) from the engine block.
6. Clean debris from the hole (1).

Installation Procedure

1. Lubricate the hole (1) with engine oil.






2. Install the camshaft position actuator solenoid (2) and bolt (3). Tighten the bolt to 10 Nm (89 in. lbs.).
3. Connect the camshaft position actuator solenoid electrical connector.
4. Install the power steering pump and bolts.
5. Install the drive belt.


pro multis · About Operation CHARM