Windshield Side Reveal Molding Replacement

Windshield Side Reveal Molding Replacement

Removal Procedure




1. Open the front door.
Remove the push pin retainers (2) from the front door sealing weatherstrip located at the base of the pillar.




2. Pull back the front door sealing weatherstrip (1) in order to expose the weatherstrip side retainer screws (2).




3. Remove the screws from the weatherstrip side retainer.
4. Remove the weatherstrip side retainer from the windshield pillar.
5. Remove the windshield reveal molding.

Installation Procedure

1. Install the windshield reveal molding.




2. Install the weatherstrip side retainer (2) to the windshield pillar.






Notice: Refer to Fastener Notice in Service Precautions.

3. Install the screws to the weatherstrip side retainer.

Tighten the screws to the weatherstrip side retainer to 2 N.m (18 lb in).




4. Install the push pin retainers (2) to the front door sealing weatherstrip located at the base of the pillar.
5. Close the door.