Transfer Case Speed Sensor Replacement - Left Rear

Transfer Case Speed Sensor Replacement - Left Rear

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case left rear speed sensor electrical connector.





3. Remove the transfer case left rear speed sensor.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the transfer case left rear speed sensor.
Tighten the sensor to 17 Nm (13 ft. lbs.).
2. Install the transfer case left rear speed sensor electrical connector.
3. Lower the vehicle. Refer to Vehicle Lifting.