Auxiliary Power Outlet: Service and Repair

ACCESSORY POWER RECEPTACLE REPLACEMENT - FLOOR CONSOLE

REMOVAL PROCEDURE




1. Using your finger tips, grasp the auxiliary power receptacle/RCA bezel at the edges and pull rearward to release the bezel from the lower center console.




2. Disconnect the electrical connector from the auxiliary module and the auxiliary power receptacles.




3. Remove the push nuts from the rear of the RCA bezel and remove the RCA harness.
4. Remove the auxiliary power receptacles from the RCA bezel.

INSTALLATION PROCEDURE




1. Install the auxiliary power receptacles to the RCA bezel.
2. Install the RCA harness to the rear of the auxiliary power receptacle/RCA bezel and install new push nuts.




3. Connect the electrical connector to the auxiliary module and the auxiliary power receptacles.




4. Install the auxiliary power receptacle/RCA bezel to the lower console.