Air Compressor Shield Replacement

Air Compressor Shield Replacement

Removal Procedure
1. Raise and support the vehicle.
2. Lower the ALC air compressor assembly.
3. Remove the ALC compressor relay.






4. Remove the ALC shield bolt (1) and retainers.






5. Remove the ALC shield (2) from the vehicle.

Installation Procedure






1. Install the ALC shield (2) onto the vehicle.
2. Install the ALC relay onto the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.






3. Install the ALC shield bolt (1) and retainers to the vehicle.
^ Tighten the bolts to 6 Nm (53 lb in).
4. Install the ALC compressor assembly onto the vehicle.
5. Lower the vehicle.