Automatic Level Control Air Compressor Head Replacement
Automatic Level Control Air Compressor Head ReplacementRemoval Procedure
1. Remove the automatic level control air compressor from the vehicle.
2. Remove the air dryer from the automatic level control air compressor.
3. Remove the wiring terminals B and C from the automatic level control air compressor electrical connector.
4. Remove the bolts/screws from the automatic level control air compressor head (2).
5. Remove the automatic level control air compressor head.
6. Remove the 0-ring (3) from the automatic level control air compressor.
Installation Procedure
1. Route the wires through the tie strap and the conduit.
2. Install the 0-ring (3) to the automatic level control air compressor.
3. Install the air compressor head.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the air compressor head bolts.
^ Tighten the air compressor head bolts in the order shown to 6 Nm (53 lb in).
5. Install the wiring to terminals B and C on the automatic level control air compressor electrical connector.
6. Install the air dryer to the automatic level control air compressor.
7. Install the automatic level control air compressor to the vehicle.