Automatic Level Control Sensor Link Replacement

The content of this article reflects the changes identified in TSB- 05-03-15-001 Dated: November 28, 2005


Automatic Level Control Sensor Link Replacement (IRS)

Removal Procedure

1. Raise and support the vehicle.







2. Remove the ELC sensor link (1) from the ball studs on the sensor and control arm.

Installation Procedure







1. Position the ELC sensor link (1) to the ball studs on the sensor and control arm.
2. Press the ELC sensor link ends onto the ball studs until fully seated.
3. Lower the vehicle.