Driver's Door Unlock Control Mode

RKE Transmitter:

To customize the Remote Unlock Control features pull the Body Control Module (BCM) PRGRM Fuse from the fuse panel and then turn the Ignition Switch to "ACCESSORY." The seat belt telltale flashes and the chime sounds 2-4 times to indicate that the vehicle is in a feature customization mode. Each time the "UNLOCK" button is pressed on the RKE Transmitter, the seat belt telltale flashes and the chime sounds a number of times equal to the current customization mode number as shown below:
- Mode 1: When you press "UNLOCK" on the RKE Transmitter, all doors and the liftgate will unlock.
- Mode 2: When you press "UNLOCK" on the RKE Transmitter once, the driver's door will unlock. When you press "UNLOCK" on the RKE Transmitter again, within five seconds, all doors and the liftgate will unlock.

Each time the "UNLOCK" button is pressed on the RKE Transmitter the mode number will advance. A transition past mode 2 will repeat starting again at mode 1. To exit and save the current customization, turn the Ignition Switch out of "ACCESSORY" and replace the BCM PRGRM Fuse back into the fuse panel. If you desire to customize other features, customize them before reinstalling the BCM PRGRM Fuse into the fuse panel.