Instrument Panel Accessory Trim Plate Replacement

Description:

Remove or Disconnect
1. Open ashtray.
2. Screws from instrument panel accessory trim plate.
3. Upper tabs on instrument panel accessory trim plate from instrument panel using a small flat-bladed tool.
4. Electrical connectors.
5. Instrument panel accessory trim plate from instrument panel.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Instrument panel accessory trim plate to instrument panel.
2. Electrical connectors.
3. Align upper tabs of instrument panel accessory trim plate to instrument panel.
4. Screws to instrument panel accessory trim plate.

Tighten
^ Screws to 2 Nm (18 lb.in.).

5. Close ashtray.