Instrument Panel Switch Bank Replacement

Description:

Remove or Disconnect
1. Battery ground (negative) cable.
2. Instrument panel accessory trim plate.
3. Bolts/screws from switch bank to instrument panel.
4. Switch bank by pulling straight out from instrument panel.
5. Electrical connectors.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Electrical connectors.
2. Switch bank by pushing in.
3. Bolts/screws to switch bank to instrument panel.

Tighten
^ Bolts/screws to 2.5 Nm (22 lb.in.).

4. Instrument panel accessory trim plate.
5. Battery ground (negative) cable.