Parking Lamp: Service and Repair

Description:

Remove or Disconnect
1. Open and support hood.
2. Battery ground (negative) cable.
3. Wing nut from headlamp bracket to front park/turn signal/sidemarker lamp bracket.
4. Front park/turn signal/sidemarker lamp from body.
5. Unscrew the bulb socket from the front park/turn signal/sidemarker lamp by pressing the tab while turning counterclockwise.
6. Pull bulb from socket.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Press bulb into socket.
2. Socket to front park/turn signal/sidemarker lamp.
3. Front park/turn signal/sidemarker lamp to body by locating tabs into fender and tab into headlamp bracket.
4. Wing nut to headlamp bracket to front park/turn signal/sidemarker lamp bracket.
5. Battery ground (negative) cable.
6. Close hood.