Inlet Pipe

Heater Hoses Quick Connect Fitting:

Heater Pipes:

Heater Hose Clamp Orientation:

Tools Required:
J 38185 Hose Clamp Pliers
J 38723 Heater Line Quick Connect Separator

Remove or Disconnect

1. Air cleaner and duct assembly.
2. Drain cooling system.
3. Inlet hose from inlet pipe.
4. Inlet pipe mounting nut.
5. Inlet pipe from quick disconnect nipple.
6. Inlet pipe.

Install or Connect

1. Inlet pipe.
2. Inlet pipe to quick disconnect nipple.
3. Inlet pipe mounting nut.

Tighten
^ Nut to 7 N.m (62 lb. in.).

4. Inlet hose to inlet pipe.
5. Refill cooling system.
6. Air cleaner and duct assembly.