Automatic Level Control Air Compressor Bracket

REMOVAL
Remove or disconnect the following:
1. Auto level control air compressor from vehicle.
2. Bolt/screw and auto level control air compressor relay from auto level control air compressor bracket.
3. Remaining bolt/screw and push in retainers holding rubber shield to bracket, and shield from bracket.
4. Auto level control air compressor electrical connector from bracket.
5. Bolts/screws retaining auto level control air compressor to bracket, and bracket from auto level control air compressor.

INSTALLATION
Install or connect the following:
1. Bracket and bolts/screws to auto level control air compressor.
^ Tighten bolts/screws to 4 Nm (35 inch lbs.).
2. Auto level control air compressor electrical connector to bracket.
3. Rubber shield, bolt/screw, and push in retainers to bracket.
^ Tighten bolt/screw to 3 Nm (27 inch lbs.).
4. Auto level control air compressor relay and bolt/screw to auto level control air compressor bracket.
^ Tighten bolt/screw to 3 Nm (27 inch lbs.).
5. Auto level control air compressor to vehicle.